Jumper Settings On The Sinec L1 Submodule; Bt 777 Bus Terminal - Siemens S5-155U System Manual

Jumper settings on the
SINEC L1 submodule

BT 777 bus terminal

System Manual
C79000-B8576-C199-03
When the SINEC L1 submodule is delivered, the jumpers are set as
shown in the following figure. As a rule, therefore, you can use the
SINEC L1 submodule immediately.
Front Connector
15-Pin Sub. D-Type
3 2
Backplane Connector
Figure 5-25 SINEC L1 Submodule: Jumper Settings when Delivered
The connection to the SINEC L1 bus system is provided by the
BT 777 bus terminal. A detailed description of the bus terminal can
be found in the manual entitled "SINEC L1 Bus System,
6ES5 998-7LA11).
The order number can be found in the ordering information.
Interface Submodule
X8
X7
X10
X9
X6
1
5
5 - 93