Operator controls and displays
5.2 LED display
Meaning of the "BAT" LED
The "BAT" LED signals the following states depending on the type of power supply:
Power supply
Rechargeable
battery operation,
HMI device on
Rechargeable
battery operation,
HMI device off
Docking station,
HMI device on or
off
①
②
③
④
⑤
⑥
Note the following:
● An error event always has priority.
If an error occurs, the "BAT" LED signals according to column
● If the battery is not fully charged, the "BAT" LED signals according to column
● If the main rechargeable battery is fully charged, the "BAT" LED signals according to
column
86
①
Charge at ≤6% capacity
Charge at > 6% capacity
Maximum charge
Rechargeable battery not in the HMI device
Rechargeable battery temperature too high
Possible error:
Short circuit, discharge current > 8.0 A
Overload, discharge current > 4.0 A
Overload, charge current > 2.8 A
Charging error, cell voltage > 4.3 V
Charging error, cell voltage < 3.0 V
③
.
BAT LED
②
③
④
Operating Instructions, 08/2010, A5E02453837-01
PRELIMINARY II
1.7.2010
⑤
⑥
–
⑥
.
⑤
.
Wireless Teach Pendant F IWLAN V2