Siemens SIMATIC S5 Manual page 173

Input
— — — — ————
Fig. 5/1 5 Machining program display
Description of the output fields
INPUT is displayed in the header and M A C H I N I N G P R O G R A M is displaywi in output
field 2. DEVICE displays the previously selected target device and BLOCK the previously
selected DB no.
Description of the input fields
In the first input field "program type" you can select between a main program
routine ("L"). The permitted entries are MAIN and SUB.
In the next input field, you can enter a comment, e.g. to provide information about the machining
program.
Significance of the function keys
<Fl >: With this function key you branch to input of machining programs according to DIN.
With this function key you branch to input of machining programs in the TEXT mode.
With the HELP key you can select the type of program (MAIN or SUB).
5 - 3 6
B L O C K : D B
DEVICE : ~D— ~
and a sub-
("?4.")