Installing The Router In A Rack - HP FlexNetwork MSR3064 Installation Manual

To mount the router on a workbench:
Make sure the workbench is clean, stable, and reliably grounded.
1.
Place the router upside down on the workbench and attach the rubber feet to the four round
2.
holes in the chassis bottom.
Figure 6 Attaching the rubber feet
Place the router on the workbench with the upside up.
3.
Figure 7 Mounting the router on a workbench

Installing the router in a rack

Mounting brackets
The MSR3000 routers require different types of front mounting brackets, as shown in
Figure 8 Front mounting brackets
10
Figure 8.