Other Leds Of The Drive - ABB ACS800-07-0610-3 Hardware Manual

LED
Fan Failure
Fan Full Speed
Over Temp Fault
Over Temp Warning
Phase L_._ Missing
Note: A fault indication LED normally stays lit after the fault is detected. However,
the LED will blink during an input power break to minimise back-up battery current
consumption. The battery discharge time is 30 ... 60 minutes.

Other LEDs of the drive

Location
RMIO board (RDCU drive control
unit)
Control panel mounting platform
(with the control panel removed)
AINT board (visible through the
transparent cover on the front of the
inverter modules)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Cause
See FAN FAILURE above.
Cooling fan rotates at maximum speed.
See OVER TEMP FAULT
See OVER TEMP WARN
See SUPPLY MISSING above.
LED
Red
Green
Red
Green
V204 (green)
V309 (red)
V310 (green)
What to do
See FAN FAILURE
-
above. See OVER TEMP FAULT
above. See OVER TEMP FAULT
See SUPPLY MISSING
Drive in fault state.
The power supply on the board is OK.
Drive in fault state
The main + 24 V power supply for the control panel and the
RMIO board is OK.
+5 V voltage of the board is OK.
Prevention of unexpected start is ON.
IGBT control signal transmission to the gate driver control
boards is enabled.
above.
above.
above.
above.
Indication
Fault tracing
115