Cleaning And Care; Downdraft Extractor Housing - Miele ProLine CSDA 1010 Operating And Installation Instructions

Before cleaning, the downdraft
extractor and the CombiSets must
be switched off and the CombiSets
need to have cooled down.
For instructions on how to clean the
CombiSet appliances, please refer to
their separate operating instructions.

Downdraft extractor housing

General
The surfaces and controls are
susceptible to scratches and
abrasion.
Please observe the following
cleaning instructions.
 All external surfaces and controls can
be cleaned using warm water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
 After cleaning, wipe the surfaces dry
using a soft cloth.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.

Cleaning and care

Important for appliances with
stainless steel surfaces
 Stainless steel surfaces can be
cleaned with a proprietary non-
abrasive cleaning agent designed
specifically for use on stainless steel,
e.g. Original Miele ceramic and
stainless steel cooktop cleaner.
 To help prevent re-soiling, a
proprietary conditioning agent for
stainless steel (Original Miele Care
product for stainless steel) can also
be used. Follow the manufacturer's
instructions on the packaging.
Apply sparingly with a soft cloth
following the instructions on the
packaging.
Do not use a ceramic and stainless
steel cleaner or stainless steel
conditioning agent on the printing.
This would rub the printing off.
These areas should only be cleaned
with a solution of warm water and a
little washing-up liquid applied with a
soft sponge.
19