Parts Replacement and Cleaning Procedure > Periodic Parts Replacement, Consumable Parts, and Cleaning Parts > Removing the scratch prevention sheet (rear)
Removing the scratch prevention sheet (rear)
1) Remove the trimmer unit from the finisher.
3) Remove the rear side cables from 6 cable guides.
x6
4
Parts Replacement and Cleaning Procedure > Periodic Parts Replacement, Consumable Parts, and Cleaning Parts > Removing the scratch prevention sheet (rear)
2) Remove 3 screws at the front side, and 3 screws at the rear side.
x3
4) Remove 2 resin rings, 1 pulley, 1 parallel pin, and 1 bearing and remove the feeder top unit.