Important Safety Instructions - Husqvarna 250 Operating Manual

01/23/2008
IMPORTANT SAFEW INSTRUCTIONS
W)er
Jswig
rj el.wtn at
apliun e
basir
safttv prec auttol v
should always
be followed,
oc luchng Itii folk. wing
l/ood all nctru. tions before using this household sewing machine
DANGER
To reduce the risk of electric shock:
• Do not leave sewing machine when plugged in. Turn off the switch and unplug from
electric outlet the electric cord when not in use or before servicing.
• Always unplug before relamping. Replace bulb with same type rated 15 Wafts.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to person:
• Do not use outdoors or on wet surfaces.
• Do not allow to used as a toy. Close attention is necessary when used by or near
children.
• Use only as described in this manual. Use only manufacturer's recommended attach
ments.
• Do not use with damaged cord or plug. If sewing machine is not working as it should, has
been dropped or damaged, left outdoors, or dropped in water; return it to the nearest
authorized delaer or service center before using, examination, repai electrical or
mechanical adjustment.
• Never operate the sewing machine with any air openings blocked. Keep veniilation
openings of sewing machine and foot controller free from the accumulation of lint, dust,
and loose cloth,
• Never drop or insert any objects into any opening.
• To disconnect, turn the switch off, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
• Keep fingers away from all moving parts. Special care is required around the sewing
machine needle.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push the fabric while stitching. It may deflect the needle causing to break.
• Switch the sewing machine off when making any adjustments in the needle area, such
as threading needle, changing needle, threading bobbin, or changing presser foot,
and the like.
• Always unplug the sewing machine from electrical outlet when removing covers, or
when making other user servicing adjustments mentioned in the instruction manual. No
lubrication by customer is recommended.
• Keep your work area well lighted.
SAVE THESE INSTRUCTIONS
For the USA and Canada:
This Sewing Machine has a polarized plug (one blade wider than the other). To reduce the
risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not modify the plug in any way.