Mitsubishi Electric AJ65BTS-RPH User Manual page 31

CAUTION
Be sure that the communication cable connected to the module is kept in the
duct or is fixed with cramps.
Failure to do so may cause a damage to the module or cables due to
dangling, shifting or inadvertent handling of cable, or malfunction because of
bad cable contacts.
Do not grab on the cable when removing the communication cable connected
to the module.
When removing the cable with a connector, hold the connector on the side
that is connected to the module.
Do not install the control lines together with the communication cables, or
bring them close to each other.
Failure to do so may cause malfunctions due to noise.
Do not disassemble or modify the modules.
Doing so could cause failure, erroneous operation, injury, or fire.
Before cleaning, retightening the terminal block or module fixing screws, or
installing/removing a module, be sure to shut off all phases of the external
power supply used in the system.
Not doing so can cause the module to fail or malfunction.
Do not install/remove the terminal block more than 50 times after the first use
of the product. (IEC 61131-2 compliant)
Before handling the module, make sure to touch a grounded metal object to
discharge the static electricity from the human body.
Failure to do say cause a failure or malfunctions of the module.
When disposing of this product, treat it as industrial waste.
21