Table of Contents
Advertisement
Available languages
Available languages
Remote control
5
Remote control
5.1
Description of the LCD
Fig. 6
Multifunctional LCD
1
Displays temperature, error codes and functions
2
"Remote control in operation" indication (signal arriving at
remote control)
3
Device in operation (with burner on)
4
Temperature measurement unit (possible in °C and °F)
5
Remote control battery level indication (weak signal coming
from the remote control)
6
Priority function (temperature cannot be modified by other
user when water is running)
7
"Error code" symbol
5.2
Hot water temperature adjustment by
remote control
B Press the buttons
(Fig. 7, pos. 2) until the required temperature appears
on the remote control display (Fig. 7, pos. 1).
B When the required temperature is displayed, turn on
the hot water tap.
B The required temperature will flash on the remote
control display.
B The flashing will stop when the required temperature
is reached (tolerance from selected set point +/-5°F
(+/- 2°C).
Fig. 7
Temperature adjustment
16
or
on the remote control
5.3
"Program" button on the remote con-
trol
Memorizing the water temperature with the remote
control "Program" button
B Press the buttons
(Fig. 8, pos. 2), until the required temperature
appears on the remote control display (Fig. 8, pos. 1).
B You will now be able to memorize this temperature by
pressing the "Program" button on the remote control
(Fig. 8, pos. 3) for 3 seconds.
Note: Previously saved temperature may
show on the display when first pushing the
program button. Once "PR" shows on the
display, the desired setting will be saved.
Fig. 8
Memorizing water temperature
B Only one temperature per remote control can be
memorized using the "Program" button on the remote
control.
B At this point the remote control will display the mem-
orized temperature.
When the hot water tap is turned on, the water heater
will supply hot water at the temperature memorized
on the remote control.
Up to six addition remote controls can be
used to memorize a temperature for each
remote control.
Using the "Program" button (operation with memo-
rized temperature)
To operate the equipment with a previously memo-
rized temperature:
or
on the remote control
6 720 680 078 (2011/09)
Advertisement
Table of Contents
