Advertisement
CAUTION: The panels have cut metal edges. Handle
carefully to avoid cuts to hands and scratches on
panels.
To change
the front panel color:
1.
2.
Remove the drawer from the unit. (See Step 4 of the
Installation
Instructions.)
Remove handle by removing the screws at the top
inside of the drawer.
3.
4.
5.
6.
7.
8.
Remove spacer and inside panel.
See Figure 15.
Remove spacer and center panel if supplied.
Remove outside front panel. DO NOT SCRATCH.
Select the color you wish to have showing
and
carefully
push the panel in the drawer trim.
Replace
the spacer,
then
carefully
replace
the
remaining
panels and spacers on the inside.
Replace the handle with the screws removed in Step
2 above.
9.
Replace the drawer.
The color of the console may be
changed by using one of the following
console inserts from your dealer:
PART NO. 4151847 WHITE
PART NO. 4151848 ALMOND
I
CAUTION:
REPLACE HANDLE BEFORE OPERATING
COMPACTOR TO AVOID INJURY FROM MOVING PARTS. I
CUSTOM DECORATING
In place of the panel pack, you may use a VI" thick wood
panel to match your cabinets or other suitable decorative
material.
See Figure 76.
To do so:
1.
Follow Steps 1 through
5 under Changing
Panel
Color. Also remove all cardboard.
2.
Slide decorative
panel between trim pieces.
3.
Remount handle with screws previously
removed.
4.
Slide the drawer into the unit.
5.
Paint, wallpaper,
fabric, etc., can be applied directly
to one of the panels.
I
21%"
I
I-
14%"
FlGURE 16
KITCHENAID
KitchenAid
ST. JOSEPH, MI
49085
PART
NO. 4151913
REV. B
Advertisement
