A.1.7 Communication Services And Used Port Numbers - Siemens SINAMICS Configuration Manual

Function diagram
2197
2198
2199
2200
Overview of important parameters
Note
For a description of the parameters, see the converter List Manual.
Parameter
p0115[0]
p2037
r2050[0...31]
p2051[0...31]
r2060[0...30]
p2061[0...30]
p8811
p8812[0...1]
p8835
p8836
p8839[0...1]
p8870[0...31]
p8871[0...31]
p8872[0...31]
A.1.7 Communication services and used port numbers
SINAMICS converters support the communication protocols listed in the following table. The
address parameters, the relevant communication layer, as well as the communication role and
the communication direction are decisive for each protocol. You require this information to
match the security measures for the protection of the automation system to the used protocols
(e.g. firewall). The security measures are restricted to Ethernet and PROFINET networks.
The following table shows the various layers and protocols that are used.
Industrial Security
Configuration Manual, 08/2017, A5E36912609A
Description
Control Unit communication - SINAMICS Link overview
(r0108.31 = 1, p8835 = 3)
Control Unit communication - SINAMICS Link configuration
(r0108.31 = 1, p8835 = 3)
Control Unit communication - SINAMICS Link receive data
(r0108.31 = 1, p8835 = 3)
Control Unit communication - SINAMICS Link send data
(r0108.31 = 1, p8835 = 3)
Function
Sampling time for additional functions
IF1 PROFIdrive STW1.10 = 0 mode
CO: IF1 PROFIdrive PZD receive word
CI: IF1 PROFIdrive PZD send word
CO: IF1 PROFIdrive PZD receive double word
CI: IF1 PROFIdrive PZD send double word
SINAMICS Link project selection
SINAMICS Link cycle settings
CBE20 firmware selection
SINAMICS Link node address
PZD interface hardware assignment
SINAMICS Link PZD receive word
SINAMICS Link PZD send word
SINAMICS Link PZD receive address
Communication
A.1 Communication
215