FPBE W2 Fingerprint Reader
2.4
How to enroll a fingerprint
In order to improve the fingerprint authentication rate, register the
fingerprint correctly. ARD-FPBEW2 can recognize a fingerprint even if
the angle and position of a user's fingerprint input change. If you
register the fingerprint with attention to the following matters, the
authentication rate can be improved.
Selecting a finger for fingerprint input
–
In preparation for the case that the fingerprint of a specific finger
cannot be used, for example if the user is lifting a load with one
hand or a finger gets hurt, up to 10 fingerprints for each user can
be registered.
–
In the case of a user whose fingerprint cannot be recognized well,
the authentication rate can be improved by enrolling the same
finger twice repeatedly.
–
If a finger has a cut or the fingerprint is blurry, select another finger
for the fingerprint.
Bosch Access Systems GmbH
Introduction | en 13
2018-02 | ARD-FPBEW2-IC |