Table of Contents
Advertisement
Transaxle rear cover assembly (O/D and 2nd coast brake piston)
1. Snap ring
2. O/D and 2nd coast brake return spring subassembly
3. O/D and 2nd coast brake piston front O-ring
4. O/D and 2nd coast brake piston rear O-ring
5. O/D and 2nd coast brake piston
6. Rear cover seal ring
7. Transaxle rear cover
8. Rear cover plug
9. Rear cover plug O-ring
Apply automatic transaxle fluid.
Do not reuse.
Tightening torque
Disassembly
1) Remove snap ring by using special tools and hydraulic
press.
CAUTION:
Do not press O/D and 2nd coast brake return spring sub-
assembly in over 1.0 mm (0.039 in.).
Excessive compression may cause damage to O/D and
2nd coast brake return spring subassembly and/or pis-
ton.
Special tool
(A): 09926-96030
(B): 09946-06710
2) Remove O/D and 2nd coast brake return spring assembly.
1. Transaxle rear cover
AUTOMATIC TRANSAXLE (M13 ENGINE) 7B1-161
Advertisement
Table of Contents
