HP 9000 Installation Manual page 46

D class and r class internal peripherals enterprise servers

Hide thumbs Also See for 9000:

R Class Internal Peripherals Installation

Installation Procedures

N. Replace the Top

1. Position the hinge tab of the top rear panel so that it goes into the slot at the rear

Sheet Metal Panels

2. Position the hinge tab of the top front panel so that it goes into the slot at the

3. Align and tighten the three screws of the top front panel into the holes as shown

2-16

of the system cabinet. Lower the top rear panel into place.

front of the system cabinet. Lower the top front panel into place.

in the illustration.

Table of Contents