HP 9000 Installation Manual page 18

D Class Internal Peripherals Installation
Installation Procedures
3. Insert the combined drive mechanism and bracket into the space
immediately beneath the floppy drive in the server cabinet, and
secure the bracket to the cabinet with four (4) screws.
4. Remove the metal EMI shield from the rear of the bracket, and
connect the SCSI ribbon cable and the power supply cables to the rear
connectors of the installed drives. Reattach the shield when all cables
have been connected to the rear of the drives.
5. Connect the other end of the SCSI ribbon cable to the internal single-
ended SCSI connector on the system board.
1-12 Chapter 1