Complete the NEC Storage NS420 installation
To complete the NEC Storage NS420 installation:
1. Insert the setup disk into the floppy disk drive of NEC Storage NS420.
2. Turn on NEC Storage NS420 and it starts operation.
Verify the beep codes when starting NEC Storage NS420 for the first time. NEC
Storage NS420 has started normally when it repeats the beep pattern (2 long beeps
and 4 short beeps) four times.
However, the detailed settings of NEC Storage NS420 and the setup specific to each
management application installed in NEC Storage NS420 are still necessary.
Setting Up Your Storage Server 115