Table of Contents
Advertisement
#ELP_Display.book Page 13 Friday, May 14, 1999 5:39 PM
TURNING THE RADIO ON OR OFF
ON
1.
Turn the On-Off/Volume Control knob clock-
wise to turn on the radio. You will hear the
Self Test Pass Tone (
green LED if the radio powers up success-
fully. If the radio fails its self test, you will hear
the Self Test Fail Tone (
off and on again and if fault persists contact
your dealer.
2.
To turn off the radio, turn the On-Off/Volume
Control knob counter-clockwise, until you
hear a click.
ADJUSTING THE RADIO'S VOLUME
1.
Press and hold the preprogrammed Volume
Set button; you will hear a continuous tone.
2.
Turn the On-Off/Volume Control knob and
adjust the volume level.
3.
Release the preprogrammed Volume Set
button.
SELECTING A RADIO CHANNEL
OFF
Your radio offers 16 channels for easy access to
required conventional channels. Some channels
on your radio may not be programmed. Check
with your dealer for more information.
) and see a
Turn the Channel Selector knob clockwise or
counter-clockwise until you reach the desired
channel.
). Switch
13
English
Advertisement
Table of Contents
