Led Indication - Panasonic KX-NCP500 Features Manual

1.20.3 LED Indication

Description
The LED (Light Emitting Diode) of the Message/Ringer Lamp and following buttons (Line Status Buttons and
Corresponding Extension Status Button) show line conditions with a variety of light patterns.
Line Status Buttons: S-CO, G-CO, L-CO, INTERCOM, ICD Group, PDN
Corresponding Extension Status Button: DSS, SDN
1.
Light Pattern of the Message/Ringer Lamp
[DPT]
•
Incoming call from a trunk: Red flashing
•
Incoming call from another extension: Green flashing
•
Message(s) present (no incoming call): Red on
•
No message(s) present (no incoming call): Off
[APT]
•
Incoming call: Red flashing
•
Message(s) present (no incoming call): Red on
•
No message(s) present (no incoming call): Off
2.
Light Pattern of the Line Status Buttons
Light
Pattern
Off
Green on
Slow green
flashing
Moderate
green
flashing
Rapid green
flashing
Trunk Status
S-CO G-CO
This extension is holding the line using Exclusive Hold or using the line for an
Incoming call/
Privacy
Release
Line Status Button
L-CO
Idle
This extension is using the line.
This extension is holding the line.
Unattended Conference.
Incoming call
1.20.3 LED Indication
Incoming
Call
Intercom
Distribution
Line Status
Group Line
Status
INTERCOM ICD Group
Feature Guide 249