Panasonic KX-NCP500 Features Manual page 190

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

1.15.1 Conference Group Call
Button
TRANSFER
FLASH/RECALL (Flash/Recall
mode)
SP-PHONE
A member extension can inform the caller that he wants to speak or join the conversation by sending a
notification. The caller will hear a notification tone and the requesting extension's information will be shown on
the display for five seconds.
Conference Groups
Eight conference groups can be programmed, and a maximum of 7 members (31 members in Broadcast Mode)
can be assigned to each group. The available destinations as members of the conference group are as follows:
Wired Extension (PT/SLT/SIP Extension/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Only available when the networking type of the trunk is assigned as private.
*1
Join After Time Out
When conference group members do not answer a conference group call within the preprogrammed time limit,
the member's telephones will stop ringing. However, even after the time limit has expired, members can join
the conference.
Additionally, extension users not registered in the called conference group can join a conference after it has
started. Outside callers using DISA and TIE line users can also join a conference after accessing their extension
using Walking COS.
An entry code can also be specified to restrict access to the call. The entry code can be set when the caller
initiates the conference group call. If an entry code is to be set, usually the caller will inform call participants in
advance.
[Starting a Conference Group Call using Hands-free Answerback]
190
Feature Guide
Removes the member who joined the conversation last. The member
can still listen to the announcement.
Removes the member who joined the conversation last. The member
will be disconnected from the conference group call and hear a
reorder tone.
Enables a hands-free conversation.
Destination
Function
Availability
ü
ü
ü
ü
ü
*1
ü
*1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents