Toshiba GRT100 Series Instruction Manual page 85

Transformer protection relay
Hide thumbs Also See for GRT100 Series:
Table of Contents

Advertisement

(On the lowest line, the entered number blinks.)
 After completing the setting on the screen, press the END key to return to the upper menu.
To correct the entered number, do the following.
 If it is before pressing the ENTER key, press the CANCEL key and enter the new number.
 If it is after pressing the ENTER key, move the cursor to the correct line by pressing the
and
keys and enter the new number.
Note: If the CANCEL key is pressed after any entry is confirmed by pressing the ENTER key, all
the entries performed so far on the screen concerned are canceled and screen returns to the
upper one.
When the screen shown below is displayed, perform setting as follows.
The number to the right of "Current No. = " shows the current setting.
/ 3
C h a n g e
1 = G r o u p 1
5 = G r o u p 5
C u r r e n t
 Enter a number to the right of "Select No. = ". (Numbers other than those displayed cannot be
entered.)
 Press the ENTER key to confirm the entry and the entered number blinks.
 After completing the setting on the screen, press the END key to return to the upper screen.
To correct the entered number, do the following.
 If it is before pressing the ENTER key, press the CANCEL key and enter the new number.
 If it is after pressing the ENTER key, enter the new number.
To enter numerical values
When the screen shown below is displayed, perform setting as follows:
The number to the left of the cursor shows the current setting or default setting set at shipment.
The cursor can be moved to upper or lower lines within the screen by pressing the
keys. If setting (change) is not required, skip the line with the
/ 6
V T
&
1 C T
(
2 C T
(
3 C T
(
1 n C T
(
2 n C T
(
3 n C T
(
V T
(
 Move the cursor to a setting line.
 Enter the numerical value.
 Press the ENTER key to confirm the entry and the cursor will move to the next line below.
a c t i v
e
g
r o
u
p
2 =
G r o u p 2
3 = G r o u p 3
6 = G r o u p 6
7 = G r o u p 7
N o . = *
C T
r a t i o
1 -
2
0 0 0 0 ) :
1 -
2 0 0 0 0 ) :
1 - 2 0 0 0 0 ) :
1 - 2 0 0 0 0 ) :
1 - 2 0 0 0 0 ) :
1 - 2 0 0 0 0 ) :
1 - 2 0 0 0 0 ) :
 84 
(
A c t i v
e
g
r o u p =
4 = G r o u p 4
8 = G r o u p 8
S e l e c t
N o .
and
keys.
2 0 0 0
1
0 0 0
4 0 0
1 0 0
1 0 0
1 0 0
4 0 0
6 F 2 S 0 7 8 9
* )
=
and
1 /7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents