Siemens SINUMERIK 840D sl Operating Manual page 592

Tool management
11.5 Tool list
Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
Red "X"
Procedure
See also
Displaying tool details (Page 620)
Changing the cutting edge position or tool type (Page 622)
592
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool List" window opens.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tool tip will
provide a brief description.
The tool is preselected.
The magazine location is positioned at the change
position.
The magazine location is positioned at the loading
position.
The magazine location is disabled.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning