Structuring programs
● Before generating the actual program, generate a program frame using empty blocks.
● By forming blocks, structure existing G code or ShopTurn programs.
Procedure
Opening and closing blocks
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
1.
Select the "Program manager" operating area.
2.
Select the storage location and create a program or open a program.
The program editor opens.
3.
Select the required program blocks that you wish to combine to form a
block.
4.
Press the "Build group" softkey.
The "Build New Group" window opens.
5.
Enter a designation for the block, assign the spindle, if required, select
the Addit. run-in code and the automatic retraction and then press the
"OK" softkey.
6.
Press the ">>" and "View" softkeys.
7.
Press the "Open all blocks" softkey if you wish to display the program
with all the blocks.
8.
Press the "Close all blocks" softkey, if you wish to display the program
again in a structured form.
Machining the workpiece
4.10 Editing a program
145