Setting Ptz Parameters - Huawei IPC6125-WDL-FA Configuration Manual

IPC6125-WDL-FA
Configuration Guide
Step 2 Set transparent channel parameters.
The Enable in the transparent channel and Enable serial port in the PTZ parameters area cannot be selected
at the same time.
Step 3 Click Save.
----End

8.1.3 Setting PTZ Parameters

You can set PTZ parameters to control IPCs using the PTZ.
Prerequisites
The IPC is connected to an external PTZ, and the PTZ has been configured.
Procedure
Step 1 Choose Settings > PTZ Configuration > PTZ&Serial Port Parameters.
The PTZ&Serial Port Parameters page is displayed, as shown in
Figure 8-3 PTZ&Serial Port Parameters page
Step 2 Set PTZ parameters. For detailed parameter description, see
Before setting PTZ parameters on the IPC web client, verify that the external PTZ is
connected and configured.
Issue 01 (2016-08-20)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Setting PTZ Control Parameters
Figure 8-3.
Table 8-2.
94