Figure 4-2
Geographic Position
The Display Geographic Position option is selectable and the user may configure the reporting
interval as shown in Figure 4-2, if the license for this licensed feature has been purchased and enabled
on the network. Another indicator that this feature is enabled is that the Geo Position tab is viewable;
otherwise the Geo Position tab would not be shown. For additional information about the Geo Position
tab and its use, please see the Geo Position tab section of this documentation.
If the Display Geographic Position checkbox is grayed out, and a license has been purchased, check
with your company's Network Administrator about enabling this option from within the MOTOMESH
MeshManager application.
Geographic Reporting
The Geographic Reporting feature becomes enabled when the Geographic Position checkbox is both
enabled (licensed, not grayed out) and contains a check mark.
Table 4-3
Geographic Reporting section
Section Item
Antenna Cable Length
6881011Y52-O August 2005
MeshTray Configuration Tab
To ensure a detailed Geographic Positioning calculation, the length
of the antenna needs to be entered in feet or meters. Only whole
numbers can be used in these entry fields.
4-3
MOTOMESH 1.0 Wireless Modem Card Users Guide
Explanation