Barring Incoming Calls (Caller Id Service Users Only) - Panasonic KX-HDV430 Operating Instructions Manual

4.6 Barring Incoming Calls (Caller ID
users only)
This feature allows the unit to reject calls from specified phone numbers that you do not want to answer
such as junk calls.
When a call is received, the unit does not ring while the caller is being identified.
If the phone number matches an entry in the call barred list, the unit rejects the call.
If an outside call that contains Caller ID information (a caller's name and telephone number) is received, this information will be
*1
logged in the incoming call log and displayed on the LCD.
If a call from a number matching a number entered in the phonebook is received, the name registered in the phonebook for that
number will be displayed along with the number.
If caller information is sent by the phone system and there is also information stored in the phonebook for the same number, the
information stored in the phonebook will be displayed.
Note
•
A password may be required for these settings. We recommend setting with your administrator.
Contact your administrator for further information.
Storing unwanted callers
You can store up to 30 phone numbers in the call barred list by using the caller list or by entering the
numbers directly.
1.
In standby mode, tap
2.
Tap or , and then select "Call Settings".
3.
Tap or , and then select "Block Caller ID".
4.
Tap or , and then select a blank line.
5.
Enter the phone number (max. 32 digits), and then tap "OK".
Note
•
You can also register a phone number by tapping "Block Caller ID" when a caller who you want to
block is selected on the incoming call log list and continuing the procedure from step 5.
Editing the phone numbers to reject
1.
In standby mode, tap
2.
Tap or , and then select "Call Settings".
3.
Tap or , and then select "Block Caller ID".
4.
Tap or , and then select a desired phone number.
5.
Edit the phone number, and then tap "OK".
Deleting the phone numbers to reject
1.
In standby mode, tap
2.
Tap or , and then select "Call Settings".
3.
Tap or , and then select "Block Caller ID".
4.
Tap .
5.
Tap or , and then tap the check boxes of the items you want to delete.
Document Version: 2017-08
or , and then select "Advanced Settings".
or , and then select "Advanced Settings".
or , and then select "Advanced Settings".
4.6 Barring Incoming Calls (Caller ID service users only)
*1
service
*1
*1
Operating Instructions 101