Main menu – functions
Prerequisite:
You have selected a specific base as described above and
. The display shows:
have called up the submenu
*
%
3
)4 %
6666666666666666
To activate, press the display
key
.
43
Settings
Overview – settings
Setting
Explanation/notes
Handset
Call volume;
Volume
Level 1 is not shown in the
display!
Ringer
Volume and tone
Options
(call signal, bell)
– volume
Low to high or
ringer off
– tone
Set tone frequency
Register
see page 16
Base
see page 46
Settings
Handset
see page 48
Settings
Note:
Before it is saved, each setting can be cancelled using
or
and you can return to the higher-level
display.
On-hook key
for terminating/cancelling functions
and returning to the "on" status immediately.
44
Settings
Settings – handset, ringer, etc.
Level
Default
3
1
5 "#
6
6
0
10
2
–
–
Example: Setting the ringer volume
–
–
–
–
1
5 "#
7% !
See page 59 for information on acoustic signals.
Press the menu key.
Scroll to
and confirm.
For an explanation of the individual
settings, see the section entitled
"Overview – settings", page 44.
Press the menu key.
Scroll to
and confirm.
Scroll to
and confirm.
Confirm the ringer volume – the ringer
volume audible is specific to the cur-
rent setting (default: level 6), see the
display.
Symbol for ringer
Dark bars indicate the current
setting – level 3 in this case
Confirm current setting
(save)
Change the setting
Press the display keys to set the
required volume and confirm.
45