Motorola SVG2500 User Manual page 113

This document is uncontrolled pending incorporation in PDM
13 TROUBLESHOOTING
8. Double-click remove or remove.exe to run the Remove utility from the SVG2500
Installation CD-ROM. The Motorola USB Driver Removal window is displayed. Be
sure the USB cable is disconnected.
9. Click Remove Driver. A progress bar indicates that the driver is being removed.
10. Click Exit to exit the Motorola USB Driver Removal Utility.
or
Click Details to display informational messages about the files that were found
and deleted similar to the ones shown below. If necessary, scroll down to view
the entire list. Click OK to close the details window.
11. Re-install the USB driver following one of the options listed below:
•
Setting Up the USB Driver in Windows 2000
•
Setting Up the USB Driver in Windows XP
12. If you continue to have problems, contact your Internet provider.
127