Motorola SVG2500 User Manual page 107

This document is uncontrolled pending incorporation in PDM
12 SVG2500 BATTERY PAGES
The Battery pages show varying status information on the batteries
installed in the SVG2500.
You can click any Battery submenu option to view the status
information for that option.
Battery Controller Page
This page displays the status of the SVG2500 battery controller.
Field
Driver
Built
Current Power Source
Number of Batteries
Input Voltage
Temperature
Estimated Time Remaining
Description
Shows the Revision Level of the PICO microcode. The PICO is the
module within the BCM3368 that is responsible for managing the
battery charge and discharge circuitry.
Shows the date and time of the build of the PICO microcode in use
by the unit.
Shows the active power source for the unit as utility (when operating
on AC) or battery.
Shows the number of batteries currently installed in the battery pack.
Shows the current voltage (mV) being supplied to the unit by the
active power source.
Shows the current internal temperature (degrees Celsius) of the unit
as measured by the temperature-sensing resistor
Shows the estimated time until the battery power is depleted
121