Philips HP6371 Manual page 9

 Press the setting selector (1) and slide the comb upwards or
downwards () to set the desired setting (Fig. 8).
The coloured circle on the handle shows the selected setting.
,
The table shows which hair lengths you achieve with the different settings.
When you trim for the first time, start at the highest setting (5) to
familiarise yourself with the precision trimmer.
settings of precision comb
Setting
1
2
3
4
5
 Push the on/off slide upwards to switch on the appliance.
5 Move the precision trimmer with the precision comb slowly
through the hair (Fig. 9).
- To trim in the most effective way, move the appliance against the
direction of hair growth.
- Since all hair does not grow in the same direction, you need to move
the appliance in different directions (upward, downward or across).
- Make sure that the flat part of the comb is always fully in contact with
the skin to obtain an even result.
- To make trimming easier, stretch the skin with your free hand during
trimming (Fig. 10).
6 Regularly remove cut hair from the comb.
If a lot of hair has accumulated in the comb, remove the comb from the
appliance and blow and/or shake the hair out of it.
Hair length after trimming
2mm
4mm
6mm
8mm
10mm
EnglisH
9