Panasonic KX-T336 System Reference Manual page 923

4.00 Channel Assignment
4.01 T-1 card
Summary
Assigns the type of T-1 interface to each channel.
Assigning Items
Slot No.
Frame Sequence
Line Coding
Channel (01 to 24)
Description of Assigning Item
Frame Sequence Assigns the type of Frame Sequence for each T-1 card.
Line Coding Assigns the type of Line Coding for each T-1 card.
Channel Assigns the type of T-1 interface to each channel.
(01 to 24)
Conditions
The number of "Channel Assignment screens" may vary depending on the number of T1 DIGITAL TRUNK
cards installed to the system. Up to six T1 DIGITAL TRUNK cards can be installed to the system. Channel
numbers 25 through 32 are not available. A "– (hyphen)" is displayed in these columns and the cursor
skips them.
If you assign "OPX" to a channel, "DN Assignment" is also required. Refer to Section 9-C-3.00 "DN
Assignment".
Default
Automatic set Physical slot no. (101,105,109,201,205,209,301,
ESF D4 / ESF
B8ZS AMI / B8ZS
Blank: Not assigned LCO / GCO / DID / OPX / TIE
9-C-8
(70695)
(Password level : One)
Selection of Value
305,309)
Reference
3-F-15.00
10-C-64.04
3-F-15.00