Panasonic KX-T336 System Reference Manual page 875

<Example 2>
Deleting Office code 220 in Toll Restriction Office
Code Table
1. Press the F8 key.
SET>Set Office code No. (200-999)
1 2 3 4
2. Enter the office code number 220.
SET>Set Office code No. (200-999) =220
1 2 3 4
3. Move the cursor to the right by using "
and press N.
SET>Set Office code No. (200-999) =200 (Y:yes/N:no) N
1 2 3 4
F8
(Y:yes/N:no)
5 6 7 EXIT 8
2 0
2
(Y:yes/N:no)
5 6 7 EXIT 8
",
N
5 6 7 EXIT 8
4. Press the RETURN key.
Toll Restriction-Office Code Table
2 Hundred Office code
,01,02,03 --- 09
10,11,12,13 --- 19
,21,22,23 --- 29
SET>Office code No. (200-999) =200 (Y:yes/N:no) N
* * * * * OK
1 2 3
Office code 220 is deleted
• Office code 220 is deleted and " " (blank)
appears on the screen. Also the following
message shows that code 220 is deleted
properly:
***** OK
Conditions
When the SET operation is unsuccessful, the
following error message appears:
***** ERROR: Illegal parameter
For details of the error contents, refer to Section
9-M "Error Message Tables."
It is also possible to designate wide range of
office code by using N, P, X instead of the
number:
N : 2 to 9
P : 0,1
X : 0 to 9
For example, then designating the office codes
200 through 209, enter : 20X
7-J-21
(60395)
RETURN
Office Code Table No.=01 (1/4)
3 Hundred Office code
4 5 6 7 EXIT 8