Page 2
Introduction / Important Safety Precautions Introduction / Important Safety Precautions Using LG Easy Guide, LG Troubleshooting LG Electronics Inc. provides LG Easy Guide (User's Guide) and LG Troubleshooting (Troubleshooting Guide) to users for their easy and convenient use of the product.
Page 3
Introduction / Important Safety Precautions Press the [ ] button to display the Start menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 4
Introduction / Important Safety Precautions Select [LG Easy Guide] or [LG Troubleshooting] tile to run it. Select the [ ] button > [All Apps] > [LG Software] to run [LG Easy Guide] or [LG Troubleshooting].
Page 5
Use, duplication, or reproduction of any part of LG Easy Guide without prior permission from LG Electronics Inc. is strictly prohibited. • LG Electronics Inc. does not provide warranty for data loss. In order to minimize damage from data loss, please make backup copies of important data. Safety Precaution Notations The below symbols are to inform you of dangers and safety concerns that you must be aware of.
Page 6
The illustrated figures in LG Easy Guide may differ in appearance with the actual products. Unauthorized reproduction or duplication of any part of LG Easy Guide is strictly prohibited. LG Electronics Inc. reserves the right to modify any part of this manual for quality purposes, without prior notice.
Page 7
Introduction / Important Safety Precautions shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product. System Protection Feature If the system becomes too hot, the system protection feature automatically stops recharging the battery and switches to hibernate mode or turns the power off.
Page 8
Introduction / Important Safety Precautions CAUTION • To replace the CMOS backup battery, visit the LG Electronics Service Center. • The computer may be damaged if an incompatible battery is used. • The product warranty is not applied to failure or breakdown caused by willful damage by the user.
Introduction / Important Safety Precautions Important Safety Precautions Please use the machine in the proper environment to extend the machine's lifespan. Use the machine in a safe and stable place. The warranty does not cover any damage resulting from reckless use or use in undesirable environments.
Page 10
Introduction / Important Safety Precautions Product Installation/Usage Precautions CAUTION Place the machine in a safe place so it does not fall. • If dropped, the machine may be damaged or cause an injury. Use the product in a clean, dust-free environment. •...
Page 11
Introduction / Important Safety Precautions Do not press or scratch the LCD with a sharp object. • It may cause impairment. Ensure the power is off before shutting the LCD. • The product may catch fire, be broken or deformed due to temperature rise.
Page 12
• Do not use the machine when the memory cover is open. It may damage the machine. Please use parts certified by LG Electronics Inc™. • Otherwise, a fire or product damage may occur. Consult our service engineer before you use a peripheral device not manufactured by LG Electronics Inc.™...
Page 13
Introduction / Important Safety Precautions • Moisture may cause a glitch or electric shock. • Please use the machine within the appropriate temperature range (10 °C to 35 °C) and humidity range (20% RH to 80% RH). Clean the PC with a proper agent and dry it completely before using it again.
Page 14
Introduction / Important Safety Precautions Ask one of our engineers to run a safety check after your computer has been repaired. • Otherwise, an electric shock or fire may occur. For minors, we recommend a program that blocks access to illegal or pornographic web sites.
Page 15
Introduction / Important Safety Precautions If you dissemble the PC, connect the power after reassembly is done. • Any exposed part may give you an electric shock. Do not put in metal items such as coins, hair pin or other irons or inflammables such as paper or matches.
Page 16
Introduction / Important Safety Precautions Product Storage/Transportation Precautions CAUTION Before carrying the machine, turn off the power and disconnect all the cables. • Otherwise, you may trip over the wire, damaging the PC and sustaining an injury. Do not carry the machine with the LCD open. •...
Page 17
Introduction / Important Safety Precautions WARNING During air travel, follow the directions of flight attendants. • Using the PC during flight may cause an aircraft accident. When leaving the machine in a car, avoid exposure to direct sunlight. • The product may get deformed or caught on fire due to a temperature rise.
Page 18
Otherwise, the battery may be damaged presenting a risk of fire. Do not throw or disassemble the battery. • The resulting damage may cause an injury, explosion, or fire. Use batteries certified and acknowledged by LG Electronics Inc™. • Otherwise, an explosion or fire may occur.
Page 19
Introduction / Important Safety Precautions Do not short-circuit the battery. • Otherwise, it may explode. Do not dispose of a spent or backup (standby) battery arbitrarily. • It may explode or cause a fire. • Disposal methods may differ by country and region. Dispose of spent batteries in accordance with the laws and safety rules of the country and region you reside in.
Page 20
PC and adapter. Read the battery usage precautions carefully before use. • Keep the battery at the room temperature. Refer to Tips in LG Easy Guide and Installation Guide to use and store the battery properly. Ensure that the power jack linked to the AC adapter and product is connected firmly.
Page 21
Introduction / Important Safety Precautions Pull the plug, not the cord, to disconnect the AC adapter and power jack. • Otherwise, a fire or product damage may occur. Operate the product at the proper voltage. • Excessive voltage may result in damage on the product, electric shock or fire.
Page 22
Introduction / Important Safety Precautions Always keep the AC adapter and power outlet clean. • A fire may occur. Keep children and pets from damaging the power cord. • It may cause a fire or an electric shock. Disconnect the PC completely before cleaning it. •...
Page 23
The manufacturer is not responsible for any data loss. We do not refund or replace a product that malfunctions due to the installation or use of an operating system other than the one provided by LG Electronics Inc. • Some software applications may not work properly in other operating systems.
Introduction / Important Safety Precautions ® ENERGY STAR ENERGY STAR ® ® ENERGY STAR Specifications • LG Electronics Inc. participates in ENERGY STAR ® and the energy efficiency of this product complies with the specifications of ENERGY STAR ® • ENERGY STAR ®...
Introduction / Important Safety Precautions Product Specifications PC Specifications Display 39.6 cm IPS LCD The display resolution may differ by model. Intel ® Core™ i7 / i5 / i3 or Intel ® Pentium ® processor The CPU differs depending on model type and cannot be replaced by the user.
Page 26
Introduction / Important Safety Precautions The types and specifications of the display, CPU, Graphics, Storage Device (HDD, SSD, eMMC), Bluetooth, Wireless LAN and Web Camera may differ depending on the computer model. The user must not replace them. Power Supply and Environments AC Adapter (Free Voltage) Power Capacity: 40 W Input: AC 100 V to 240 V, 1.0 A to 1.1 A 50 / 60 Hz...
Using Windows 10 Using Windows 10 Start Menu A New Start Menu The Start menu in Windows 10 has been changed so you can use Windows quickly and easily. Press the [ ] button in the lower-left corner of the screen to display the Start menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 28
Using Windows 10 User Account: Displays the current user's information. You can use functions such as Change Account Settings, Lock or Logout. Frequently Used Apps: Displays frequently used apps and recently added items. File Explorer: You can sort data as you wish and quickly search for the items in the system.
Page 29
Using Windows 10 • Press [ ] + [X], and then the [ ] button pop-up menu appears. You can use the pop-up menu to easily access the shortcuts for Control Panel, Explorer, Search, System Shutdown, and the desktop environment. Desktop Apps and Windows Apps The Desktop apps remain unchanged from the previous Windows apps, but Windows apps have been changed to include various features.
Using Windows 10 Using Apps Running and Exiting Apps The apps not added on the Start menu or installed in the system may be run by using the following method: Press the [ ] button and select the [All Apps] menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 31
Using Windows 10 When the app list appears, select and run an app. To exit an app, press the [ ] button on the top of the app screen. Deleting Apps You can delete apps from the Start menu tiles or [All Apps] menu. The basic Windows apps that are required may not be deleted.
Page 32
Using Windows 10 Press the [ ] button to display the Start menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 33
Using Windows 10 Go to the Start menu app tiles or the [All Apps] menu and right-click the app you wish to delete.
Page 34
Using Windows 10 When the pop-up menu appears, select [Uninstall]. If you are deleting a desktop app, the [Programs and Features] window appears. Right-click the app you wish to delete and press the [Uninstall/Change] button.
Page 35
Using Windows 10 When prompted to confirm the deletion, press the [Uninstall] button to delete the app. Adding Apps to Start Menu/Taskbar You can add frequently used apps on the Start menu and taskbar for easy and quick access.
Page 36
Using Windows 10 Press the [ ] button and select the [All Apps] menu. Right-click on the app you want from the app list, and then select [Pin to Start] or [Pin to taskbar].
Page 37
Using Windows 10 The selected app is added to the Start menu or taskbar.
Page 38
Using Windows 10 Toggling and Adding Apps/Desktops In Windows 10, you can toggle the running apps easily and quickly, and add desktops to use them like multiple PCs. For an app that does not allow multitasking, you may be switched to the desktop where the app was executed, or you may have an error message.
Page 39
Using Windows 10 The screen to switch between apps and desktops appears and the running apps are displayed in the preview. Press the [ ] button of an app in the preview to exit the app.
Page 40
Using Windows 10 Press the [New Desktop] tile. [Desktop 1] and [Desktop 2] are created. Two desktops are provided by default and you can add more if necessary.
Page 41
Using Windows 10 Select an app in the preview or desktop. The screen is toggled to the selected app or desktop.
Page 42
Using Windows 10 Press the [ ] button in the app preview to exit the app. In the desktop preview, press the [ ] button to delete the desktop and move running apps to another desktop.
Page 43
Using Windows 10 Using Shortcut Keys Use the shortcut keys to quickly toggle between apps and desktops. Shortcut Keys Comments [Alt] + [Tab] Press [Alt] together with the [Tab] key to view the running apps in the preview. Press [Tab] several times to select an app you wish to switch to and release the key.
Page 44
Using Windows 10 Splitting the App Screen In Windows 10, you can easily adjust window sizes and split windows if necessary. Some apps that cannot adjust the window size do not support the screen split.
Page 45
Using Windows 10 Full Screen Drag and drop an app to the top end of the screen to change the app to the full screen size. Drag and drop the app again to a different location to return to its original size.
Page 46
Using Windows 10 Screen Split into Two Drag and drop an app to the right end or left end to reduce the size by half. The screen is split according to the guideline.
Page 47
Using Windows 10 Select a running app displayed in the preview on the split screen. Drag and drop the app again to a different location to return to its original size.
Page 48
Using Windows 10 Screen Split into Four Drag and drop an app to the left corner to reduce the app to 1/4 size of the screen. The screen is split according to the guideline.
Page 49
Using Windows 10 You can use this method to place up to four apps on the screen. Drag and drop the app again to a different location to return to its original size.
Page 50
Using Windows 10 Using the Store You can purchase apps or get free apps from Windows Store. If a local account is being used, a window to switch to a Microsoft account appears while using Windows Store. Follow the instructions on the screen to switch the local account to a Microsoft account.
Page 51
Using Windows 10 On the Store screen, select a category or app of your choice. On the app details screen, select [Free], [Install] or a button with an app price. App installation starts in a moment.
Page 52
Using Windows 10 Press [All Apps] on the Start menu to check the apps installed in the app list.
Using Windows 10 Switching to Tablet Mode If you are using Windows on a tablet PC, you can easily switch to the tablet mode. Press the Action Center [ ] icon on the right side of the taskbar.
Page 54
Using Windows 10 Select [Tablet Mode] to switch Windows to tablet mode. Select Tablet Mode again to deactivate the mode.
Using Windows 10 Unlocking the Screen If the PC is not used for an extended period, it goes into a locked state. When the PC is used again, a lock screen appears for security purposes and may be unlocked by using the following method. From the lock screen, press any key on the keyboard or drag up while you click and hold the mouse button.
Using Windows 10 Setting the PC Windows 10 supports various features so the user can change the PC settings easily and quickly. Using Action Center You can use the Action Center to easily change the settings for tablet mode, display, media connection and network settings.
Page 57
Using Windows 10 Change the PC settings as needed. To change the detailed settings of the PC, press the [All Settings] tile.
Page 58
Using Windows 10 Using the Start Menu Press the [ ] button and select the [Settings] menu.
Page 59
Using Windows 10 When the screen for PC's detailed settings appears, select and change the settings as needed.
Page 60
Using Windows 10 Windows Shutdown Option In Windows 10, you can use the Windows shutdown option by following these steps: Press the [ ] button and select the [Power] menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu. Select a Windows shutdown option.
The internal battery should not be arbitrarily disassembled or replaced. Arbitrarily disassembling the product may void the warranty. If you need to disassemble or replace the battery, please visit the designated LG Electronics Service Center. We charge a fee for removing or replacing the battery.
Page 62
Using the PC WARNING Please use an AC adapter certified by LG Electronics Inc.™ • Uncertified batteries may explode. • It may cause a problem in battery charging or system operation. When you use an AC adapter, follow the directions below.
Page 63
Open the LCD and check the charging state. When the AC adapter lamp is blinking, charge it fully with the AC adapter before using it. CAUTION Use batteries certified and acknowledged by LG Electronics Inc™. • Uncertified batteries may explode.
Page 64
Using the PC WARNING The battery may explode due to excessive heat, causing fire. For a safe and efficient use of battery, follow the below directions. • Do not short-circuit the battery. • Keep the battery out of reach of children. •...
Page 65
The battery capacity may change due to chemical reactions during charge and discharge. • The system checks the charge status of LG batteries frequently, and then calculates and indicates the actual battery duration on the current system setup. • The battery is wearable goods and thus the life span may become shorter with use.
Using the PC Operation Status Lamps Power Lamp: • On: The system is on and running by the AC adapter or battery. • Off: The system is turned off. • Blinking: The system is in the standby mode. AC Adapter Lamp •...
Page 67
Using the PC Touchpad Lamp • On: When the touchpad is activated • Off: When the touchpad is deactivated Reader Mode Lamp • On: When the reader mode is activated • Off: When the reader mode is deactivated Webcam Operation Status Lamp •...
Page 68
Using Hot Keys You can use the hot keys shown below to use the PC conveniently. Fn + F1 Runs LG Control Center Fn + F2 Decreases LCD brightness, which can have eleven different levels. Fn + F3 Increases LCD brightness, which can have eleven different levels.
Page 69
Using the PC Fn + ▼ Works as [Page Down]. Fn + Prt Sc Works as the [Scr LK] key. Fn + Ctrl Works as the [Pop-up Window] key. Shortcut Keys • To change the input mode temporarily, you can press the [Shift] key together with the letter you want to enter.
Using the PC Adjusting Screen Brightness and Volume LG PC allows you to use the hot keys to easily adjust the screen brightness and volume. According to the model type, a button for volume control (mute, volume up / down, etc.) may be available.
Using the PC Using the Touchpad The built-in touchpad provides the same features as an external mouse. You can use the touchpad and USB mouse simultaneously. For best performance, it is recommended to use the driver provided by the touchpad manufacturer.
Page 72
Using the PC Click (Select) Press and release the left button swiftly with a finger. (Or tap the touchpad once.) Do this, for example, to select a menu or icon and to place the cursor to type on a word processor file.
Page 73
Using the PC CAUTION Notes on Using the Touchpad • Do not use a sharp object such as a pen on the pad nor peel the cover. It may cause an impairment. • Do not place more than one finger, and do not use while wearing a glove or when the hand is wet.
Page 74
Using the PC Drag & Drop To drag, click and hold an icon, and move it to another location. To drop, release the dragged icon in the location you want. To move a file icon to another folder or to Recycle Bin, place the cursor (or the pointer) on the icon, press and hold the left button, and glide another finger on the touchpad until the icon reaches the aimed location.
Page 75
Using the PC Press the [ ] button and select the [Settings] menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 76
Using the PC When [Settings] screen appears, select [Devices]. Select [Mouse and Touchpad] > [Additional Mouse Options].
Page 77
Using the PC When [Mouse Properties] screen appears, select [Turn on ClickLock]. Press [Settings] to set the time for the ClickLock.
Page 78
Using the PC Press the left button of the touchpad and release it to change the button into the pressed state. Move on the touchpad to use the drag/scroll feature. Press the left mouse button to turn off the ClickLock. Touchpad Gesture The touchpad gesture feature allows you to use Windows programs more easily by utilizing different touching methods.
Page 79
Using the PC • Place two fingers on the touchpad and move up/down/left/right to scroll the screen. (It operates only on an app or screen which scrolling is available.) • Place two fingers on the touchpad and widen or narrow them to zoom out or in.
Page 80
Using the PC Setting Touchpad You can change the touchpad features or enable/disable the gesture feature. The figures herein may differ by language selection and is subject to change for performance improvements without prior notice. On the desktop taskbar, double-click the touchpad settings icon.
Page 81
Using the PC When the following screen appears, change the settings and press [OK].
Page 82
HDMI is a high-speed multimedia interface that can transfer uncompressed full digital audio and video signals. When LG Notebook PC supports SPDIF, HDMI is not supported. Use ‘HDMI to VGA Gender' to connect to VGA port. HDMI to VGA Gender is available at LG Service Center.
Page 83
Using the PC Press [Fn] + [F7] to redirect the video output to the external device. Switching screen output device by pressing [Fn] + [F7] • Press [Fn] + [F7] to display the Toggle Screen menu. Then select the screen mode you want and press [Enter].
Page 84
Using the PC Connecting to Wireless Display The wireless display feature connects the PC screen and sound to a display (TV, projector, etc.). • To use the wireless display feature, the display device must support the wireless display feature. • To connect to the display device that does not support wireless display, you must separately purchase a wireless display connection device.
Page 85
Using the PC When the Action Center screen appears, press the [Connect] tile. Search for wireless display devices in the proximity.
Page 86
Using the PC If the device is connected as shown below, the PC screen and sound are produced on the wireless display device.
Page 87
Using the PC Using the USB Type-C Port The USB Type-C port mounted on this product supports USB 3.1 Gen 1 (USB 3.0) standards. Use the Type-C port to charge the notebook PC battery or to output a screen to an external display.
Page 88
Using the PC Bluetooth Bluetooth allows the user to access wirelessly various devices such as camera, cell phone, headset, printer, and GPS receiver that support Bluetooth . It can also establish a network and exchange data with other Bluetooth -enabled PC or smartphone. The Bluetooth device is optional, and it may not be available in some models.
Page 89
Using the PC When [Settings] screen appears, select [Devices]. Select the [Bluetooth] menu to search for Bluetooth devices automatically.
Page 90
Using the PC Select a device to connect and press [Pair]. Complete the Bluetooth connection as guided.
Connect the LAN adapter to the USB Type-C port on the PC. The recommended network cable for the optimal network environment is CAT5 or higher. The network (LAN) cable may be connected when the LAN adapter is used. The LAN adapter may be separately purchased at LG Service Center.
Page 92
Using the PC Connect the wired LAN cable to the LAN port.
Page 93
Using the PC Press the [ ] button and select the [Settings] menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 94
Using the PC Select [Network and Internet] > [Ethernet] > [Change Adapter Options].
Page 95
Using the PC Right-click [Ethernet] and select the [Properties] menu.
Page 96
Using the PC Select [Internet Protocol Version 4 (TCP/IPv4)] and press the [Properties] button.
Page 97
Using the PC To use an automatic IP(DHCP), select [Obtain an IP Address Automatically]. If you wish to use a static IP, select [Use the following IP address] to enter the address. Contact the network service provider or administrator to use a static IP. Press [OK] to complete the network setup.
Using the PC Wireless LAN The wireless network (Wireless LAN) is the network environment that connects a PC with the internet provider or company network through an Access Point (wired or wireless router). Wireless LAN is optional. Hence, it may not be installed in some models. Turning On/Off Airplane Mode Prior to using the wireless LAN, press [Fn] + [F6] to turn off Airplane Mode.
Page 99
Using the PC Press the [ ] button and select the [Settings] menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 100
Using the PC Select [Network and Internet] > [WiFi] to search for near access points. Select an access point to connect to and press the [Connect] button.
Page 101
Using the PC If a connection is established, [Connected] is displayed below the access point name. Press Internet Browser to check if the internet is working properly.
Page 102
Using the PC Using a Wired/Wireless Router A wired / wireless router connects several PCs and mobile devices to one internet line and enables the use of internet and the network. A wired / wireless router has to be bought separately. Refer to the manual provided by the manufacturer for instructions.
Using the PC Micro SD Slot Checking Available Memory Card This model supports Micro SD memory cards. Directly applicable memory cards Mounting and Using Memory Card This product supports one Micro SD slot. Insert the card into the multi-card slot to the fullest in the right direction as shown in the following figure.
Page 104
Using the PC • When the memory card is formatted, the data stored in the memory card will be deleted. Check whether there are important data before formatting the memory stick. • To format a memory card, right-click the memory card drive and select Format. When Format window appears, press Start to continue.
Page 105
Using the PC To safely remove a memory card: The figures herein may differ by language selection and is subject to change for performance improvements without prior notice. Press Safely Remove Hardware and other Media icon on the right side of the taskbar.
Using Software LG Control Center LG Control Center is a software that helps you to change PC Settings, Power Settings, Windows Security Settings, etc. as well as viewing system information. LG Control Center For more details about how to use , refer to the corresponding help.
Page 107
Using Software a Minimize/Exit Button: Minimizes the size of the window, or exits the software. b Help/Information Button: Runs Help or displays information about the software. c System Settings : Sets up the screen brightness / resolution, external display, sound and other various devices.
Page 108
Using Software LG Update Center LG Update Center allows you to install various PC drivers, applications and Windows patches easily. The illustrated images are subject to change without prior notice. It may not work properly depending on user preferences (security tools, etc.) and the network status.
Page 109
Using Software c Notification Setting: Sets up notifications for online updates for installed items. You can use LG Update Center to install deleted drivers or latest drivers easily and quickly. Use LG Update Center to keep your system current and optimized.
Page 110
Using Software LG Reader Mode LG Reader Mode allows you to change the screen to reader mode or movie mode according to the user's needs. Using LG Reader Mode You can use hot keys to use the reader mode more conveniently.
Page 111
Using Software Select the [Reader Mode On] or [Movie Mode On] menu. Reader Mode: The screen outputs like printed paper to prevent eyestrain. Movie Mode: Changes to a screen optimized for movie watching. Select [Mode Off] to turn off the mode.
Restoring the System Restoring the System Restoring the System If the system has an error, you can use Windows 10's recovery feature to recover or restore the system to its initial pre-purchase state. CAUTION If you have deleted the restoration data in the protected area of the hard disk, or have arbitrarily installed another operating system, the recovery feature may not work.
Page 113
Restoring the System When the [Settings] screen appears, select [Update & security]. Select the [Recovery] menu and press [Get started] to reset the PC. If the following screen appears, select a desired option to proceed with recovery.
Page 114
Restoring the System a Keep my files : Recovers the PC without losing any personal files. PC settings are reset to the default and any user-installed Desktop app will be deleted. b Remove everything : Removes all items from the system and restores the system to its initial pre-purchase state.
Page 115
Restoring the System • Just Remove My Files: Factory-resets the drive where Windows is installed (for example: Drive C). • Remove files and clean the drive: Resets all partitions and drives in the system. CAUTION All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions.
Page 116
Restoring the System LG Recovery Center RE If booting is impossible due to an error with the system, you can recover the system using LG Recovery Center RE. It is recommended that you create a recovery drive in case a serious error occurs in the system.
Page 117
Restoring the System When the following screen appears, select the [I Agree] button and then press [Next]. For recovery, the power adapter must be connected. Connect the system power and then recover the system.
Page 118
Restoring the System When the factory reset is completed as shown in the following figure, press [Complete] and then restart the system.
Recovery Drive Creating Recovery Drive Create a recovery drive in case LG Recovery Center RE is unable to recover the system. This process may delete all data on the storage device designated as the recovery drive. Make sure to back up all important data in advance.
Page 120
Restoring the System Press [Recovery] in the control panel and select [Create Recovery Drive]. When the following screen appears, select [Back up the system files to the recovery drive.] and press [Next].
Page 121
Once the storage device is ready, press [Finish] to complete the creation of the recovery drive. Using Recovery Drive In case LG Recovery Center RE is unable to recover the system, you can use the recovery drive to recover the system. CAUTION All data may be lost depending on the user settings during the system recovery.
] icon on the desktop to run LG Update Center. Select the [ ] button > [All Apps] > [LG Software] and run [LG Update Center]. Select [Required Update] or [All List] to install the driver. For more information on LG Update Center, refer to [Help].
Page 123
Setup and Upgrade You can use LG Update Center to install deleted drivers or latest drivers easily and quickly. For the system optimization, use LG Update Center to keep up-to-date. How to Download LG Update Center You can download LG Update Center from LG Electronics Cyber Service Center (www.lg.
Setup and Upgrade Starting System Setup System setup means storing the hardware configuration information of the PC in the flash memory. Through system setup, the PC retrieves various information including current date and time, memory capacity, and storage device (HDD, SSD, eMMC) capacity and type. You setup the system when you set passwords, change the boot order, and add new peripheral devices to the machine.
Page 125
Setup and Upgrade Reboot the system and press [F2]. In a few moments, the system setup screen appears.
Page 126
Setup and Upgrade Keys Used in System Setup Keys Function Enter Selects the current item. To deselect the current item or to move to the previous screen. ▲, ▼, ◄, ► (Arrow Moves the cursor up, down, left, and right. keys) Saves the new settings or exits the system setup.
Setup and Upgrade Setting the Password This process is to set a password so that other people cannot use the PC or change the settings. The user can set a password while booting the system or setting up the system. CAUTION •...
Page 128
Setup and Upgrade When the following screen appears, press [Enter] in the [Set Supervisor Password] menu.
Page 129
Setup and Upgrade When the following message appears, enter the password and press [OK]. The password must not exceed 8 characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both.
Page 130
Setup and Upgrade When the following message appears, press [OK]. To save the changes in the system setup, press [F10].
Page 131
Setup and Upgrade When the following message appears, press [YES]. The PC will restart. • With Supervisor Password, you are authorized to set all items in the System Setup and to set Password on boot. In case other people also use the PC, it is recommended to set the Set User Password.
Page 132
Setup and Upgrade After opening the system setup screen, press the [Security] button. When the following screen appears, press [Enter] in the [Set User Password] menu.
Page 133
Setup and Upgrade When the following message appears, enter the password and press [OK]. The password must not exceed 8 characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both.
Page 134
Setup and Upgrade When the following message appears, press [OK]. To save the changes in the system setup, press [F10].
Page 135
Setup and Upgrade When the following message appears, press [YES]. The PC will restart. • [User Password] allows limited access to the items in the System Setup compared to the [Supervisor Password] item. Password on boot [Password on boot] menu protects the system by requesting [Set Supervisor Password] or [Set User Password] during boot up.
Page 136
Setup and Upgrade After opening the system setup screen, press the [Security] button. When the following screen appears, set [Set Supervisor Password] only or both [Set Supervisor Password] and [Set User Password].
Page 137
Setup and Upgrade Press the [Off] button in the [Password on boot] menu as shown in the following figure. The button changes to [On] and the [Password on boot] setting is completed. Set HDD Password / Set SSD Password HDD / SSD Password is to set a password in the HDD and SSD separately from the Supervisor Password.
Page 138
Setup and Upgrade After opening the system setup screen, press the [Security] button. When the [Security] menu appears, press the [HDD Security Status] button.
Page 139
Setup and Upgrade When the following screen appears, press [Enter] in the [Set HDD Password] or [Set SSD Password] menu.
Page 140
Setup and Upgrade When the following message appears, enter the password and press [OK]. The password must not exceed 8 characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both.
Page 141
Setup and Upgrade When the following message appears, press [OK]. To save the changes in the system setup, press [F10].
Page 142
Setup and Upgrade When the following message appears, press [YES]. The PC will restart. CAUTION HDD Password Without the password, it is impossible to recover the HDD. • The replacement of HDD due to a forgotten HDD Password is not covered by warranty.
Setup and Upgrade Changing or Deleting the Password You can delete or change the password only after entering the current password. Changing the Password Execute System Setup, enter the password, and press [Enter]. Change the password in the same way as setting one.
Page 144
Setup and Upgrade Deleting the Password Execute System Setup, enter the password, and press the [Security] button.
Page 145
Setup and Upgrade When the following screen appears, press [Enter] in the [Set Supervisor Password] menu.
Page 146
Setup and Upgrade When the following message appears, enter the current password in the [Enter Current Password] field.
Page 147
Setup and Upgrade Press [Enter] in [Enter New Password] and [Confirm New Password].
Page 148
Setup and Upgrade When the following message appears, press [OK]. To save the changes in the system setup, press [F10].
Page 149
Setup and Upgrade When the following message appears, press [YES]. The PC will restart.
Page 150
Setup and Upgrade Deleting the Password (Set HDD Password / Set SSD Password) Execute System Setup, enter the password, and press the [Security] button. When the [Security] menu appears, press the [HDD Security Status] button.
Page 151
Setup and Upgrade When the following screen appears, press [Enter] in the [Set HDD Password] or [Set SSD Password] menu.
Page 152
Setup and Upgrade When the following message appears, enter the current password in the [Enter Current Password] field.
Page 153
Setup and Upgrade Press [Enter] in [Enter New Password] and [Confirm New Password].
Page 154
Setup and Upgrade When the following message appears, press [OK]. To save the changes in the system setup, press [F10].
Page 155
Setup and Upgrade When the following message appears, press [YES]. The PC will restart.
Setup and Upgrade Restoring the Factory Default Settings If you have changed the system setup by mistake, you can restore the default settings. After opening the system setup screen, press the [Save & Exit] button.
Page 157
Setup and Upgrade When the [Exit] menu appears, select [Load Setup defaults].
Page 158
Setup and Upgrade When the following message appears, press [Yes]. The settings will be reset to the factory default. To save the changes in the system setup, press [F10].
Page 159
Setup and Upgrade When the following message appears, press [YES]. The PC will restart. • You may press [F9] to use the [Load Setup defaults] menu.
Setup and Upgrade Changing the Boot Order The user can change the boot order according to his or her needs, or select a boot device The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice.
Page 161
Setup and Upgrade When the system setup screen appears, press the [Boot] button. Drag the icon of the device to change the boot order in the [Edit Boot Order] menu to change the boot order.
Page 162
Setup and Upgrade To save the changes in the system setup, press [F10]. When the following message appears, press [YES]. The changes are saved and the system reboots.
Page 163
Setup and Upgrade Selecting a Boot Device to Use Reboot the system and press [F10].
Page 164
Setup and Upgrade When the Select Boot Device screen appears, select the device. Boots using the selected device.
Page 165
Setup and Upgrade Windows 10 Auto Scaling Windows 10 Auto Scaling feature for the user's convenience may partially blur the screen or display some icons and texts larger. Refer to the following information to change the DPI scaling to suit your needs. Press the [ ] button and select the [Settings] menu.
Page 166
Setup and Upgrade Select [System] > [Display]. [Change the size of text, apps and other items.] Adjust the value to change the size.
Page 167
Setup and Upgrade Press [Apply] to apply the changes.
Page 168
] icon to run [LG Control Center]. Select the [ ] button > [All Apps] > [LG Software] and run [LG Control Center]. On LG Control Center screen, set the [Instant Booting] to [ON]. Exit the system and close the notebook PC cover.
Page 169
] icon to run [LG Control Center]. Select the [ ] button > [All Apps] > [LG Software] and run [LG Control Center]. On LG Control Center screen, set the [Instant Booting] to [ON]. Exit the system and close the notebook PC cover.
Page 170
Windows 10 Auto Scaling Windows 10 Auto Scaling feature for the user's convenience may partially blur the screen or display some icons and texts larger. Refer to the following information to change the DPI scaling to suit your needs. Press the [ ] button and select the [Settings] menu.
Page 171
Select [System] > [Display]. [Change the size of text, apps and other items.] Adjust the value to change the size.
Page 173
Restoring the System If the system has an error, you can use Windows 10's recovery feature to recover or restore the system to its initial pre-purchase state. CAUTION If you have deleted the restoration data in the protected area of the hard disk, or have arbitrarily installed another operating system, the recovery feature may not work.
Page 174
When the [Settings] screen appears, select [Update & security]. Select the [Recovery] menu and press [Get started] to reset the PC. If the following screen appears, select a desired option to proceed with recovery.
Page 175
a Keep my files : Recovers the PC without losing any personal files. PC settings are reset to the default and any user-installed Desktop app will be deleted. b Remove everything : Removes all items from the system and restores the system to its initial pre-purchase state.
Page 176
• Just Remove My Files: Factory-resets the drive where Windows is installed (for example: Drive C). • Remove files and clean the drive: Resets all partitions and drives in the system. CAUTION All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions.
Page 177
HDMI is a high-speed multimedia interface that can transfer uncompressed full digital audio and video signals. When LG Notebook PC supports SPDIF, HDMI is not supported. Use ‘HDMI to VGA Gender' to connect to VGA port. HDMI to VGA Gender is available at LG Service Center.
Page 178
Press [Fn] + [F7] to redirect the video output to the external device. Switching screen output device by pressing [Fn] + [F7] • Press [Fn] + [F7] to display the Toggle Screen menu. Then select the screen mode you want and press [Enter]. CAUTION •...
Page 179
Using a Wired/Wireless Router A wired / wireless router connects several PCs and mobile devices to one internet line and enables the use of internet and the network. A wired / wireless router has to be bought separately. Refer to the manual provided by the manufacturer for instructions.
Page 180
Wireless LAN The wireless network (Wireless LAN) is the network environment that connects a PC with the internet provider or company network through an Access Point (wired or wireless router). Wireless LAN is optional. Hence, it may not be installed in some models. Turning On/Off Airplane Mode Prior to using the wireless LAN, press [Fn] + [F6] to turn off Airplane Mode.
Page 181
Press the [ ] button and select the [Settings] menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 182
Select [Network and Internet] > [WiFi] to search for near access points. Select an access point to connect to and press the [Connect] button.
Page 183
If a connection is established, [Connected] is displayed below the access point name. Press Internet Browser to check if the internet is working properly.
Page 184
Connect the LAN adapter to the USB Type-C port on the PC. The recommended network cable for the optimal network environment is CAT5 or higher. The network (LAN) cable may be connected when the LAN adapter is used. The LAN adapter may be separately purchased at LG Service Center.
Page 185
Connect the wired LAN cable to the LAN port.
Page 186
Press the [ ] button and select the [Settings] menu. Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
Page 188
Right-click [Ethernet] and select the [Properties] menu.
Page 189
Select [Internet Protocol Version 4 (TCP/IPv4)] and press the [Properties] button.
Page 190
To use an automatic IP(DHCP), select [Obtain an IP Address Automatically]. If you wish to use a static IP, select [Use the following IP address] to enter the address. Contact the network service provider or administrator to use a static IP. Press [OK] to complete the network setup.