Yamaha MMP1 Operation Manual page 21

Process Type Displays the crossover filter type.
NOTE
• You can set the crossover filter type in the
"Speaker Matrix" tab of the "Scene" tab on
the Settings screen.
• The color of the text will be orange when the
FIR filter is temporarily changed to the IIR
filter with the talkback or User Assignable
function.
Filter Setting Displays the high pass/low pass filter type and
cutoff frequency.
NOTE
You can set the high pass/low pass filter type
and cutoff frequency in the "Speaker Matrix"
tab of the "Scene" tab on the Settings screen.
Speaker Matrix Out
Name (Label) Display the Speaker Matrix Out names.
NOTE
You can change the names (labels) of
Speaker Matrix Out in the "MISC" tab of the
"Scene" tab on the Settings screen.
Speaker Set
Displays the Speaker Set to which the
Speaker Matrix Out belongs.
NOTE
You can set the Speaker Set in "Speaker
Matrix" tab of the "Scene" tab on the Settings
screen.
Speaker matrix
• Click to turn Send on (purple) or off. When a cell has
been turned on, a signal will be sent from the cell row
(the input source) to the cell column (output).
• To turn multiple cells on or off at the same time,
simultaneously hold down the right mouse button
(Windows) or the <control> key (Mac) and then drag
and release the button (key).
Quick Assign: Criss cross from dragging origin point
On: Turns entire dragged area on (purple)
Off: Turns entire dragged area off
4. Screens
MMP1 Operation Manual 21