Yamaha MMP1 Operation Manual page 17

4-1-3d. Snapshot section
Here you can store parameters at a set point in time as
Snapshots to be loaded later as desired or needed.
NOTE
Up to 20 Snapshots can be stored per Scene.
Click to store a Snapshot at the selected
Store
location.
Recall Click to recall (load) the selected Snapshot.
Name Click to select a Snapshot (or an empty field).
Double click to change the name entered.
Enter a channel name up to 17 alphanumeric
characters and symbols.
Click to lock
Locked Snapshots cannot be overwritten by
selecting Store.
NOTE
To bring up the context menu, (for Windows) right click anywhere
within the section, or (for Mac) hold down the <control> key and
then click in the section.
or unlock a Snapshot.
4-1-3e. Talkback section
Here you can select Talkback interrupt destinations and
adjust Talkback output levels.
Talkback Click to turn the Talkback on (green) or off.
NOTE
Set Talkback inputs and interrupt destinations
in the "Talkback Mic In" of the "Input Patch"
tab on the "Patch" screen and "Talkback
Destination" tab of the "Scene" tab on the
Settings screen.
Trim Drag or use the mouse wheel to adjust
Talkback levels. To return the setting to 0 dB,
simultaneously hold down the <Ctrl> key
(Windows) or the <command> key (Mac)
and click on the control.
NOTE
You can set the amount that the audio output of interrupt
destination is reduced (dimmed) when Talkback is turned on by
using "Talkback Dim Level" in the "MISC" tab of the "Scene" tab
on the Settings screen.
4. Screens
MMP1 Operation Manual 17