Table of Contents
Advertisement
000
40
Chapter 4: Advanced Operations: Customizing the Pattern Icons
Replacing the Pattern Icons in the [EFFECT] Menu
Select the composite patterns you want to display from among the PinP, chroma key, and luminance key
templates.
Adjustment values for key compositing can also be configured for chroma key and luminance key pattern
icons.
1
Display the [Pattern] screen of the PC UI in EFFECT mode.
You can also switch to EFFECT mode using the EFFECT button after displaying the [Pattern] screen.
2
Replace the pattern icons with the desired icons, and check the compositions.
When checking the
compositions, select the
videos using these video
selection buttons.
Enable EFFECT mode.
Select the composite pattern icon you
want to replace.
Select [Template] in the [Property] area
menu.
Pattern icons appear in the editing area on
the right.
Select the effect type, and then select the
pattern icon you want displayed in the
menu.
Pattern icons for each effect type appear in
the editing area.
When you select a pattern icon in this area,
it replaces the other icon immediately.
Select the AUTO TRANS or CUT button to
execute the composite.
Check the composition by viewing the
multi-viewer.
Adjust the composition.
For details, see the following.
"Adjustments for Inserting People onto
Backgrounds (Chroma Key)" (page 44)
"Using HDMI Input Signals to Insert Text (EFFECT
Mode)" (page 47)
Removing Pattern Icons
You can remove pattern icons that you do not
intend to use.
1
Select [Move] in the menu panel.
[Move] mode is enabled.
2
Select the unnecessary pattern icon, and select
[Delete].
The selected pattern icon is removed and
replaced by the [Empty] icon.
Hide quick links:
Advertisement
Table of Contents
