Sony MCX-500 Operating Instructions Manual page 27

000 27
Chapter 2: Preparation: Assigning Inputs
5
After finishing configurations, press and
unlight the ASSIGN button.
The [INPUT] menu disappears.
6
Check the assigned video input in the multi-
viewer.
[Tips]
INT input cannot be checked in the multi-viewer.
Pre-Adjustments and Settings for Audio Inputs
Determine whether to use each channel, adjust input levels, and configure settings for the audio inputs.
Select the target audio input button.
VIDEO VIDEO HDMI
9 INPUT TERMINALS SDI SDI SDI
Set to the 0 dB position.
[Tips]
Decrease the volume before connecting or disconnecting input devices (input signals).
Adjust or configure settings for each input here.
HDMI TITLE TALLY MULTI VIEWER PGM LINE
SDI
INPUT OUTPUT
Determining whether to use each channel
Specify whether to use or disable each channel.
Press an AUDIO ACCESS button to display the
[AUDIO] menu, and select (use) or deselect [CH
ON]. When [CH ON] is deselected, the audio will be
disabled.
To use To disable
Deselect (unlight).
Select (light).
When SDI or HDMI signals are assigned to inputs
1 to 4, the embedded audio is automatically
assigned to the respectively numbered audio
inputs. However, you can disable the audio via this
setting.