ABB i-bus KNX Product Manual page 234

®
ABB i-bus KNX
Commissioning
94
This communication object is enabled if the parameter Enable communication object "Start event 0/1" 1-bit has been selected
with the option Yes in
The 1-bit communication object Start event 0/1 is enabled. As a result, the same events, except those of the push
button/switch connected to the binary input, can also be triggered by the receipt of a telegram on the communication object
Start event 0/1.
Telegram value:
95...99
Not assigned
100...119
Input b, c
232 2CDC508134D0202 | FCA/S 1.x.x.1
Start event 0/1
Parameter window a: Switch
0 = Start event 0
1 = Start event 1
Input a: Switch sensor
sensor, p. 171.
1 bit C, W
DPT 1.001