®
ABB i-bus
KNX
Commissioning
3.2.3.9
Parameter window Status messages (Multi-level)
This is the parameter window where status messages are defined.
Enable communication object
"Status Fan speed x" 1-bit
Options:
The setting of a fan speed is displayed via these communication objects. You can parameterize whether or
not the status of a current or required fan speed is displayed.
Yes: Three 1 bit communication objects, Status Fan speed x (x = 1...3) are enabled.
No
Yes
Dependent parameters:
Meaning
Options:
Current fan speed
Required fan speed
This parameter defines which status – Current fan speed or Required fan speed – is displayed.
FCA/S 1.x.x.1 | 2CDC508134D0202 129