Checking The Battery Power Level - Philips IntelliVue TRx Instructions For Use Manual

Checking
When the Check button is pressed, the battery gauge on the transceiver indicates
the Battery
the battery power level. It is reliable only when specified batteries (i.e., AA 1.5V
Power Level
Alkaline) are used. The battery gauge is also displayed in the Patient Sector at
the Information Center (if configured) to enable you to closely monitor battery
status, for example, after a change of shift.
To check the power level of the transceiver:
Draft - 1 Aug 08
Step Action
1 If connected, disconnect the transceiver from Telemon or MP5.
1 Press the
Check
following).
2 If no indicators flash:
1. Check that the batteries are inserted properly.
2. Replace both batteries.
3. If there are still no indicators on the battery gauge, contact
your service provider.
If the indicators illuminate but do not behave as described above,
the transceiver has malfunctioned. Contact your service provider.
button to determine the level (see Battery Levels
Battery Information
Basic Operation 4-17