Rebooting From The Menu Interface - HP ProCurve 6400cl Series Management And Configuration Manual

Switch Memory and Configuration
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
Optional Reboot
Switch Command
Note: The Stacking
feature is available on
the Series 3400cl and
Series 6400cl
switches.
6-10

Rebooting from the Menu Interface

Terminates the current session and performs a reset of the operating
■
system
■ Activates any configuration changes that require a reboot
■ Resets statistical counters to zero
(Note that statistical counters can be reset to zero without rebooting the
switch. See "To Display the Port Counter Summary Report" on page B-11.)
To Reboot the switch, use the Reboot Switch option in the Main Menu. (Note
that the Reboot Switch option is not available if you log on in Operator mode;
that is, if you enter an Operator password instead of a manager password at
the password prompt.)
Figure 6-4. The Reboot Switch Option in the Main Menu
Rebooting To Activate Configuration Changes. Configuration changes
for most parameters become effective as soon as you save them. However,
you must reboot the switch in order to implement a change in the
parameter
VLANs to support
(To access these parameters, go to the Main menu and select 2. Switch
Configuration, then 8. VLAN Menu, then
.
1. VLAN Support
Maximum
.)