Fujitsu IP-HE950 Hardware User's Manual page 22

IP-HE950 Hardware User's Guide
ETHERNET port 1 for
LAN connection
(25)
(LAN1)
Status LED
(26)
(LINK/ACT)
Speed LED
(27)
(100/1000M)
SDI input
(28)
(SDI-IN)
SFP input
(29)
(SFP1)
SFP input
(30)
(SFP2)
External control
(31)
(RS-232C/422)
DVB-ASI input
(32)
(ASI-IN)
External sync input
(33)
(REF-IN)
External sync output
(34)
(REF-OUT)
External audio output
(35)
(AUDIO)
SDI output
(36)
(SDI-OUT)
10BASE-T/100BASE-TX/1000BASE-T communication port.
For instructions, refer to "2.7 Connection to LAN Equipment." For
cable connection information, refer to "4.2 Cable and Connector
Details."
LED that shows the status of LAN port 1. For details, refer to
"Table 5-3 LED indications" in Section 5.2.
LED that shows the speed of LAN port 1. For details, refer to
"Table 5-3 LED indications" in Section 5.2.
Connector for SD-SDI, HD-SDI, 3G-SDI, and 12G-SDI signal
input. For cable connection information, refer to "4.2 Cable and
Connector Details."
Connector for mounting a SFP module. Designated hardware
options are available. For instructions, refer to "2.7 Connection to
Quad Link 3G-SDI Equipment." For cable connection information,
refer to "4.2 Cable and Connector Details."
RS-232C or RS-422 external control communication port.
For instructions, refer to "2.5 Connection to RS-232C/RS-422
Device" in a related manual. For cable connection information,
refer to "4.2 Cable and Connector Details." This is disabled now.
DVB-ASI input connector. Input is 75 Ω unbalanced input. For
instructions, refer to "2.5 Connection to DVB-ASI Equipment." For
cable connection information, refer to "4.2 Cable and Connector
Details."
External sync input connector. Input is 75 Ω unbalanced inputs.
For instructions, refer to "2.4 Connection to External Sync Signals
(REF)." For cable connection information, refer to "4.2 Cable and
Connector Details."
External sync output connector. Output is 75 Ω unbalanced
output. For instructions, refer to "2.4 Connection to External Sync
Signals (REF)." For cable connection information, refer to "4.2
Cable and Connector Details."
External audio connector supported in the future. This is disabled
now.
Connector for SD-SDI, HD-SDI, 3G-SDI, and 12G-SDI signal
output. For cable connection information, refer to "4.2 Cable and
Connector Details."
8
Chapter 1 Preparations
Copyright 2017 FUJITSU LIMITED