Yamaha FJR13AEV(C) Service Manual page 259

10.Install:
• Front brake master cylinder assembly
• Front brake master cylinder holder "1"
Front brake master cylinder hold-
er bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
NOTE:
• Install the brake master cylinder holder with the
"UP" mark facing up.
• Align the projection "a" on the front brake mas-
ter cylinder with hole "b" on the right handlebar.
• First, tighten the upper bolt, then the lower bolt.
11.Adjust:
• Throttle cable free play
Refer to "ADJUSTING THE THROTTLE CA-
BLE FREE PLAY" on page 3-10.
Throttle cable free play
3.0–5.0 mm (0.12–0.20 in)
b
a
1
4-72
HANDLEBARS