b. Install the rider seat height position adjuster
"2" so that the "L" mark "a" is aligned with the
match mark "b".
2
c. Insert the projection "c" on the front of the rid-
er seat into seat holder (for low position) "3"
as shown.
3
1
d. Align the low position projection "d" on the
bottom of the rider seat with the "L" position
slot "e", and then push the rear of the seat
down to lock it in place as shown.
d
L
LLL
L LLL
L
L LLL
L
L LLL
L
5. Install:
• Passenger seat
Refer to "GENERAL CHASSIS" on page 4-1.
EAS21650
CHECKING THE TIRES
The following procedure applies to both of the
tires.
1. Check:
• Tire pressure
Out of specification → Regulate.
a
b
c
e
L LLL
L
L LLL
L
LLL
3-40
EWA13180
WARNING
• The tire pressure should only be checked
and regulated when the tire temperature
equals the ambient air temperature.
• The tire pressure and the suspension must
be adjusted according to the total weight
(including cargo, rider, passenger and ac-
cessories) and the anticipated riding
speed.
• Operation of an overloaded vehicle could
cause tire damage, an accident or an injury.
NEVER OVERLOAD THE VEHICLE.
CHASSIS