Installation, Connecting Up, Commissioning, Operation; Important Notes On Using The Device; Notes On Use In Hazardous Areas - Siemens S7-1500 Operating Instructions Manual

Simatic net
Hide thumbs Also See for S7-1500:
Table of Contents

Advertisement

Installation, connecting up, commissioning, operation

3.1

Important notes on using the device

Safety notices on the use of the device
Note the following safety notices when setting up and operating the device and during all
associated work such as installation, connecting up or replacing the device.
LAN attachment
A LAN or LAN segment with the attachments belonging to it should be within a single low-
voltage supply system and within a single building. Make sure that the LAN is in an of type
A environment according to IEEE 802.3 or in a type 0 environment according to IEC TR
62101.
Never establish a direct electrical connection to TNV networks (telephone network) or
WANs (Wide Area Network).
3.1.1

Notes on use in hazardous areas

The device may only be operated in an environment with pollution degree 1 or 2 (see IEC
60664-1).
EXPLOSION HAZARD
Do not connect or disconnect cables to or from the device when a flammable or
combustible atmosphere is present.
EXPLOSION HAZARD
Replacing components may impair suitability for Class 1, Division 2 or Zone 2.
CP 1543-1
Operating Instructions, 05/2017, C79000-G8976-C289-07
WARNING
WARNING
WARNING
WARNING
3
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp 1543-1

Table of Contents