D-Link DGS-1210-10 Manual page 66

Smart managed
Hide thumbs Also See for DGS-1210-10:
Table of Contents

Advertisement

4 Web-based Switch Configuration
messages received for 'Router Port Purge Interval' time, the learned router port entry will be purged. Default
is 260 seconds.
Last Member Query Interval (1-25 sec): The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of
time between Group-Specific Query messages. This value may be adjusted to modify the "leave latency" of
the network. A reduced value results in reduced time to detect the loss of the last member of a group. Default
is 1 second.
Max Response Time (10-25 sec): The Max Response Time specifies the maximum allowed time before
sending a responding report message. Adjusting this setting effects the "leave latency", or the time between
the moment the last host leaves a group and when the multicast server is notified that there are no more
members. It also allows adjustments for controlling the frequency of IGMP traffic on a subnet. Default is 10
seconds.
To enable IGMP snooping for a given VLAN, select enable and click on the Apply button. Then press the
VLAN ID number, and select the ports to be assigned as router ports for IGMP snooping for the VLAN, and
press Apply for changes to take effect. A router port configured manually is a Static Router Port, and a
Dynamic Router Port is dynamically configured by the Switch when query control message is received.
State: Specifies the State to be enabled or disabled.
Querier State: D-Link Smart Switch is able to send out the IGMP Queries to check the status of multicast
clients. Default is disabled.
Fast Leave: Specifies the Fast Leave feature to be enabled or disabled.
To view the Multicast Entry Table for a given VLAN, press the View button.
Click Delete to remove a specified entry or click Delete All to remove all entries.
Figure 4.64 – L2 Functions > Multicast > IGMP Snooping VLAN Settings
Figure 4.65 – L2 Functions > Multicast > IGMP Multicast Entry Table
D-Link Smart Managed Switch User Manual
5
9
5
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents