Reboot Device; Configuration Backup And Restore - D-Link DGS-1210-10 Manual

4 Web-based Switch Configuration

Reboot Device

Provide a safe way to reboot the system. Select YES or NO to save the current settings before action. And
click Reboot to restart the switch.

Configuration Backup and Restore

Allow the current configuration settings to be saved to a file (not including the password), and if necessary,
you can restore configuration settings from this file. Two methods can be selected: HTTP or TFTP.
HTTP: Backup or restore the configuration file to or from your local drive.
Backup/Restore Config ID Number: Select config_id 1 or config_id 2.
Click Backup to save the current settings to your disk.
Click Choose File to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.
TFTP: TFTP (Trivial File Transfer Protocol) is a file transfer protocol that allows you to transfer files to a
remote TFTP server. Specifies the configuration 1 or 2 to be specified, TFTP Server IP Address with IPv4
or IPv6 address and TFTP File Name for the configuration file you want to save to / restore from.
Click Backup to save the current settings to the TFTP server.
Click Restore after selecting the backup settings file you want to restore.
Figure 4.12 – Tool Menu > Reset System
Figure 4.13 – Tool Menu > Reboot Device
Figure 4.14 – Tool Menu > Configure Backup and Restore
Note: Switch will reboot after restore, and
all current configurations will be lost.
2 9
2 9
D-Link Smart Managed Switch User Manual