Bosch CCS 1000 D Operation Manual page 25

Digital Discussion System
Number Item
10 USB recording LED indicator
(CCSD‑CURD only)
11 Start/pause recording button
(CCSD-CURD only)
12 Stop recording button
(CCSD-CURD only)
13 USB connector
(CCSD-CURD only)
14 Headphone socket
(CCSD-CURD only)
Bosch Security Systems B.V.
Description
LED indicator for showing the status of USB memory stick recordings:
– Green continuous: USB memory stick selected; ready for recording.
– Red continuous: Recording is taking place.
– Red flashing once a second: Recording paused.
– Red flashing twice a second: 5 minutes of recording left. Three
short beeps will also be sounded to alert the user.
– Red/green flashing: Discussions cannot be saved to the USB stick
(i.e. USB memory stick full, incorrectly formatted, or damaged). A
single long beep will also be sounded to alert the user.
Note: The USB recording LED will be automatically selected and
deselected when the USB memory stick is inserted and removed from
the USB connector at the front of the unit.
Button for starting and pausing a recording session. See Recording a
discussion, page 38.
Button for stopping a recording session.
USB connector for connecting a USB memory stick to the Control Unit.
For information on the USB memory stick requirements, see Additional
components, page 12.
3.5 mm (0.14 inch) stereo headphone socket for connecting
headphones (for listening to recorded discussions). When headphones
are connected to the Control Unit the built‑in loudspeaker is muted.
Operation manual
Configuration | en 25
2014.09 | V1.0 |