CHAPTER 3: INTERFACES
NOTE:
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 3-18: SLD Configurator Component Library
Control Objects
The control objects consist of selectable breakers and disconnect switches. The following
figure shows the different symbols in the GE Standard style and IEC style. If the switching
element is tagged, blocked, or bypassed, indicators with the letters "T", "B", and "By"
appear on the lower right corner of the element. Additionally, the breaker/switch name is
displayed on top of the object.
The displayed breaker name is configured in the setpoint
. This setpoint has a 13-character limit. The name should be kept to a
Breaker[X] > Name
minimum so that it appears properly on the SLD.
SOFTWARE INTERFACE
Setpoints > System > Breakers >
3–39