Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual page 90

Commissioning the device
4.3 Parameter assignment for Comfort Panel
Requirement
● If you want to restore the factory settings:
The HMI device is connected in accordance with
"Connecting the configuration PC (Page 51)".
Procedure
1. Open the "OP Properties" dialog using the "OP" icon.
2. Change to the "Device" tab.
3. Click the "Reboot" button.
The following dialog appears:
①
②
4. Press one of the following buttons:
– "Reboot": Restart the HMI device immediately.
– "Prepare for Reset": Reset the HMI device to factory settings.
– "No": Do not perform a restart, close the dialog.
90
Button for restart
Button for restoring factory settings and subsequent restart
Note
Press "Prepare for Reset" to delete the operating system and project data.
Restore the operating system as described in the section
"Update operating system (Page 139)".
Operating Instructions, 07/2017, A5E36770603-AB
Comfort Panels